Filter
Top Products
ASUS K7M User’s Manual 63
4. BIOS SETUP
4. BIOS SETUP
Power Management
Restore on AC/Power Loss [Power Off]
This allows you to set whether you want your system to reboot after the power has
been interrupted. [Power Off] leaves your system off after reapplying power and
[Power On] boots up your system after reapplying power. [Last state] returns your
computer back to the state it is in before the power failure.
Ring Resume from Soft Off [Disabled]
This allows either setting of [Enable] or [Disable] for powering up the computer
(turns the ATX power supply on) when the modem receives a call while the com-
puter is off. NOTE: The computer cannot receive or transmit data until the com-
puter and applications are fully running. Therefore connection cannot be made on
the first try. Turning an external modem off and then back on while the computer is
off causes an initialization string that will also cause the system to power on.
LAN Resume from Soft Off [Disabled]
This allows you to remotely power up your system through your network by send-
ing a wake-up frame or signal. With this feature, you can remotely upload/download
data to/from systems during off-peak hours. Set to [Enabled] to use this feature.
IMPORTANT: This feature requires the ASUS PCI-L101 LAN Card (see APPEN-
DIX) or a similar ethernet card and an ATX power supply with at least 720mA +5V
standby power.
RTC Alarm Resume From Soft Off [Disabled]
RTC Alarm Date / Hour / Minute / Second
This allows you to have an unattended or automatic power up of your system. You
may use the four parameters (Date, Hour, Minute, and Second) to configure your
system to power up at a certain time of a day in a month by setting RTC Alarm
Resume From Soft Off to [Enabled].