Filter
Top Products
IP8000 User Manual
10
(Continued from previous page.)
6. Plug the leads from computer case’s Reset switch into pins 1–3 (on the
upper row) of the IP8000’s feature cable pin header.
7. Plug the leads from the computer case’s Power switch into pins 5–7 (on
the upper row) of the IP8000’s feature cable pin header.
Note: It is not necessary to pay attention to the plug alignment (i.e., which
wire is aligned with which pin) when you plug the leads from the feature
cable into the mainboard headers, or when you plug the leads from the
case into the feature cable header.
From Case
Reset Switch
From Case
Power Switch
1
3
5
7
ip8000.book Page 10 Friday, May 9, 2008 10:39 AM