Filter
Top Products
IP8000 User Manual
24
ANMS
The Advanced Network Management Settings dialog box allows you to set up
login authorization management from a external sources. It is divided into three
main panels, as described, below:
RADIUS Settings
To allow authorization for the IP8000 through a RADIUS server, do the
following:
1. Check Enable RADIUS.
2. Fill in the IP addresses and Service Ports for the Primary and Alternate
RADIUS servers.
3. In the Timeout field, set the time in seconds that the IP8000 waits for a
RADIUS server reply before it times out.
4. In the Retries field, set the number of allowed RADIUS retries.
5. In the Shared Secret field, key in the character string that you want to use
for authentication between the IP8000 and the RADIUS Server.
(Continues on next page.)
ip8000.book Page 24 Friday, May 9, 2008 10:39 AM