Filter
Top Products
Chapter 9. AP Operation
67
The Windows Client Connection Screen
A description of the Connection Screen is given in the following table:
Item Description
Server List Each time the WinClient program is run, it searches the user's
local LAN segment for IP8000 units, and lists whichever ones
it finds in this box. If you want to connect to one of these
units, select it, then click Login. When you have finished with
your session, Click Logout to end the connection.
Server This area is used when you want to connect to a IP8000 at a
remote location. You can drop down the IP list box and select
an address from the list. If the address you want isn't listed,
you can key in the IP address you want. Then, key in the Port
number in the Port field. If you don't know the Port number,
contact the Administrator.
When the IP address and Port number for the unit you wish to
connect to have been specified, click Login to start the
connection. When you have finished with your session, Click
Logout to end the connection.
Login Starts the connection to the IP8000.
Logout
These buttons become active once you log into the IP8000.
See page 69 for details.
Remote View
Change Password
Admin Utility
ip8000.book Page 67 Friday, May 9, 2008 10:39 AM