Filter
Top Products
Chapter 8. Device Management
129
IP Installer
The IP Installer is an external Windows-based utility for assigning IP addresses
to the KVM Over the NET
TM
switch.
Click one of the radio buttons to select Enable, View Only, or Disable for the
IP Installer utility. See IP Installer, page 208, for IP Installer details.
Note: 1. If you select View Only, you will be able to see the KVM Over the
NET
TM
switch in the IP Installer’s Device List, but you will not be
able to change the IP address.
2. For security, we strongly recommend that you set this to View Only
or Disable after use.
SMTP Settings
To have the KVM Over the NET
TM
switch email reports from the SMTP server
to you, do the following:
1. Enable the Enable report from the following SMTP server, and key in
the IP address of your SMTP server.
2. If your server requires authentication, put a check in the My server
requires authentication checkbox.
3. Key in the appropriate account information in the Account Name,
Password, and From field.
Note: 1. Only one email address is allowed in the From field, and it cannot
exceed 64 Bytes.
2. 1 Byte = 1 English alphanumeric character.
4. Key in the email address (addresses) of where you want the report of
the DHCP address and event reports sent to in the To field.
Note: If you are sending the report to more than one email address,
separate the addresses with a semicolon. The total cannot exceed
256 Bytes.
5. Select the report options you would like sent. Choices include: Report
IP address, Report system reboot, Report user login and Report user
logout.
kn2124v-4132.book Page 129 Tuesday, January 12, 2010 5:08 PM