Filter
Top Products
Chapter 2. Hardware Setup
19
Rack Mounting - Rear
To mount the unit at the rear of the rack, do the following:
1. Remove the two screws at the rear of the unit.
2. Use the M3 x 8 Phillips head hex screws supplied with the rack mounting
kit to screw the rack mounting brackets into the rear of the unit.
3. Position the device in the rack and align the holes in the mounting brackets
with the holes in the rack.
Phillips head hex
M3 x 6
Phillips head hex
M3 x 8
kn2124v-4132.book Page 19 Tuesday, January 12, 2010 5:08 PM