Filter
Top Products
1
Chapter 1
Introduction
Overview
The KVM Over the NET
TM
series of switches are IP-based KVM control units
that allow both local and remote operators to monitor and access multiple
servers from a single console. A single KN4140v can control up to 40 servers,
and by cascading up to 40 compatible 16 port switches, as many as 640 servers
can be controlled on a complete two stage installation.
The switches are differentiated according to the number of buses they support
and the number of KVM ports they provide – as shown in the table below:
Each bus permits a separate user session so that up to three (1 Local; 2 Remote)
or five (1 Local; 4 Remote) concurrent independent connections to the attached
servers can take place.
Model Bus Support KVM Ports
KN2124v 1 Local; 2 Remote 24
KN2140v 1 Local; 2 Remote 40
KN4124v 1 Local; 4 Remote 24
KN4140v 1 Local; 4 Remote 40
KN2116
A 1 Local; 2 Remote 16
KN2132 1 Local; 2 Remote 32
KN4116 1 Local; 4 Remote 16
KN4132 1 Local; 4 Remote 32
Local
Remote
Remote
Remote
Remote
1 - 20
21 - 40
TCP/IP
kn2124v-4132.book Page 1 Tuesday, January 12, 2010 5:08 PM