Filter
Top Products
Cajun P550/P880 ATM Uplink User Guide, Version 1.1
Configuring LANE
3-31
Deleting ATM LEC Switch Ports
To delete an ATM LEC switch port:
1. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens
(Figure 3-1).
2. Click the number in the Switch Ports column for the ATM
Uplink module you want to delete LEC switch ports from.
The Switch Ports dialog box opens (Figur e3-13).
3. Click Manage LEC Switch Ports. The ATM Switch LEC
Ports dialog box opens (Figure 3-14).
4. Select the ATM LEC Port in the ID column you want to
delete.
* Note: In order to change the virtual port parameters,
the Administrative Status state must be Down.
5. Click Delete. The Delete ATM LEC Switch Ports dialog box
opens.
6. Click Yes to delete the ATM port, or No to retain the port.
Viewing LEC Port Operational Information
To view the LEC port operational information:
1. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens
(Figure 3-1).
2. Click the number in the Switch Ports column for the ATM
Uplink module you want to view information for. The Switch
Ports dialog box opens (Figure 3-13).
3. Click Manage LEC Switch Ports. The ATM LEC Switch
Ports dialog box opens (Figure 3-14).
4. Click the name of the port in the Name column you want to
view. The LEC Port <#> Operational Information dialog box
opens (Figure 3-17). Table 3-10 describes the parameters.
* Note: The LEC must be enabled and operational in
order to view the information.