Filter
Top Products
3-30
Chapter 3
Cajun P550/P880 ATM Uplink User Guide, Version 1.1
7. Click APPLY to save your changes, or CANCEL to restore
the previous settings.
QoS Domain
Select the QoS Domain associated with this
port. The default value is defaultDomain.
Join Method
Select the Join Method used by this port.
Values include:
• LECS - Default
• LES
Server ATM Address Enter the Server ATM Address associated with
this LECS port. The server ATM server address
is the well-known ATM Forum address:
C5007900000000000000000000-
00A03E000001-00 (hex)
* Note:
The server ATM address is
based on the join-method.
Client Selector Enter the Client Selector. The valid range is
0 - FF (hex). You must use a unique value for
each client.
Max Unknown
Frame Count
Enter the Maximum number of Unknown
Frames sent to the BUS. Range is 2-31. The
Default is 10. It must be greater than the LE
ARP (Address Resolution Protocol) Trigger
Count.
Max Unknown
Frame Tim
Enter the maximum time frame over which
the Max Unknown Frame Count applies. The
Default is 1 second.
LE ARP Trigger
Count
Enter the number of frames that should be
sent via the BUS before trying to set up a
direct connection. Range is 1-30. Must be less
than the Max Unknown Frame Count.
Max BUS Rate By default, ATM does not rate limit the BU
connections. To rate limit the BUS
connections, enter the Max BUS rate. This is
based on the LANE server’s capabilities.
Agetime This parameter is not implemented in this
feature.
Table 3-9. LEC Switch Port Parameters
Parameter Definition