Filter
Top Products
Cajun P550/P880 ATM Uplink User Guide, Version 1.1
Configuring LANE
3-41
4. Use the information in Table 3-15 to configure the parameters
for all the switch ports on the module.
5. Click APPLY to save your changes, or CANCEL to restore
the previous settings.
* Note: If you save your changes, the changes only
apply to the current configured LEC switch ports
on the ATM Uplink module.
Viewing PNNI Statistics
The Private Network-to-Network Interface (PNNI) is used in call se
ups in ATM networks. PNNI is used in the switch for routing
between the two Cajun interfaces and is useful in trouble shooting.
Viewing the PNNI statistics includes:
■ Viewing PNNI Link Information
■ Viewing PNNI Node Information
■ Viewing PNNI Map Node Information
■ Viewing PNNI Route Address Information
Viewing PNNI Link Information
To view PNNI link state information:
1. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens
(Figure 3-1).
2. Click ATM in the Type column of the ATM Uplink module
you want to view PNNI link information for. The ATM
Module Information dialog box opens (Figu re3-2).
3. Click Additional Configuration. The ATM Configuration
dialog box opens (Figure 3-3).
4. Click Signaling Settings. The ATM Network (Signalling
Settings) dialog box opens (Figu re3-4).