Filter
Top Products
Cajun P550/P880 ATM Uplink User Guide, Version 1.1
Configuring LANE
3-43
Viewing PNNI Node Information
To view PNNI node information:
1.
Select
Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens
(Figure 3-1).
2. Click ATM in the Type column of the ATM module you want
to view the PNNI node information for. The ATM Module
Information dialog box opens (Figure 3-2).
3. Click Additional Configuration. The ATM Configuration
dialog box opens (Figure 3-3).
4. Click Signaling Settings. The ATM Network (Signalling
Settings) dialog box opens (Figu re3-4).
5. Click PNNI Node Table. The PNNI Node Table dialog box
opens (Figure 3-26). Table 3-17 provides information on the
PNNI Node Table parameters.
* Note: You may have to scroll to see the PNNI option
buttons.
Link State
(continued)
• One Way Outside -
Hellos are received
from the neighbor with different Peer Group
IDs and the Remote Node ID and Remote
Port ID fields are zeros.
•
Two Way Outside
- Hellos are received
from the neighbor with different Peer Group
ID with correct Remote Node ID and Remote
Port ID fields, but with nodal hierarchy list
without any common Peer Group.
•
Common Outside
- A common level of
hierarchy was found and nodes are
communicating fully.
•
Unknown
- Hellos are received from an
unknown source.
Remote Node ID
Displays the node identifier of the remote node on
the other end of the link.
Table 3-16. PNNI Link Parameter
Parameter Definition