Filter
Top Products
Cajun P550/P880 Switch ATM Uplink User Guide, Version 1.1
Configuring RFC 1483
4-13
Figure 4-8. PVCs for ATM Link <xxx> Dialog Box
6. Complete one of the following:
* Note: You must disable the ATM Link Admin Status to
create, delete, or modify PVCs. After changing
the parameters, change the ATM Link Admin
Status state to Enabled in order for the changes
to take effect.
— Click DELETE to remove the selected PVC. The Delete
PVC dialog box opens. Refer to "Deleting Permanent
Virtual Channels", later in this chapter.
— Click MODIFY to change the selected PVC. Refer to
"Modifying Permanent Virtual Channels", later in this
chapter.
— Click CREATE UBR to create a UBR PVC class set. Refer
to "Creating a PVC Class Set", later in this chapter for
more information.
— Click CREATE CBR to create a CBR PVC class set. Refer
to "Creating a PVC Class Set", later in this chapter for
more information.
— Click CREATE rtVBR to create a rtVBR PVC class set.
Refer to "Creating a PVC Class Set", later in this chapter
for more information.
— Click CREATE nrtVBR to create a nrtVBR PVC class set.
Refer to "Creating a PVC Class Set", later in this chapter
for more information.