Filter
Top Products
3-22
Chapter 3
Cajun P550/P880 ATM Uplink User Guide, Version 1.1
SCR Enter the Sustainable Cell Rate. This is traffic
parameter specifying an upper bound on the
average rate of the conforming cells of an ATM
connection. The unit of measurement is
cells/second. The minimum value is 2 and it must
be less than PCR.
Note: This is not available for UBR or CBR.
MBS Enter the Maximum Burst Size. This is the
maximum number of cells allowed to arrive on a
connection in excess of the PCR which is
permitted without being dropped. The valid range
is 1 to 1,000. The default is 100.
Note: This is not available for UBR or CBR.
peak-to-peak
CDV
Enter the Peak-to-Peak Cell Delay Variation. The
valid range is dependent on the ATM switch
configuration.
Note: This is not available for UBR or nrtVBR.
max CTD Enter the maximum Cell Transfer Delay. T is is
the maximum delay beyond which the cells will
either be delivered late or lost. The valid range is 0
to -1.
Note: This is not available for UBR or nrtVBR.
CLR Enter the Cell Loss Ratio. The CLR for cells sent
that do not conform to a traffic contract (or a UBR
connection) that is not guaranteed. The vali
range is 0 and 1.
Note: This is not available for UBR.
RED Pack ID Enter the RED Pack ID. Valid range is 1-4. Refer to
"Configuring RED Pack Parameters" in Chapter 2
for more information on RED Pack parameters.
* Note:
This is not available for UBR.
Table 3-7. QoS Set Creation Parameter
Parameter Definition