Filter
Top Products
Configuring I 2 of 5 Bar Codes
1. To configure I 2of5 settings, select I 2 of 5 from the Scanner
Configuration window.
I 2of5
Allows the scanner to scan I 2of5 bar codes.
Transmit
CD
Tells the scanner to return the check digit with the data
when an I 2of5 bar code is scanned.
Convert
to
EAN13
Tells the scanner to convert 14-character I 2of5 bar
codes into an EAN13 bar code.
For the conversion to work, the following must occur:
I 2of5 bar codes must be enabled.
14 must be a valid length.
The data must have a leading zero.
The data must include an EAN13 check digit.
Verify
CD
Tells the scanner to check the integrity of a scanned
I 2of5 bar code to ensure it complies with either USS or
OPCC standards.
Lengths
Sets the
length(s)
for I2 of
5 bar
codes.
Variable, specifies that I 2of5 bar codes can be any length.
Note: Specifying a range of lengths increases the likelihood of unsuccessful scans.
1 Fixed, specifies a single length for valid I 2of5 bar codes. The range for Length 1 is
2 – 99. The default is 14.
2 Fixed, specifies two lengths for valid I 2of5 bar codes. The range for Length 2 is
2 – 99. The default is 0.
2. Enable each bar code you need to scan.
3. Touch OK to save all the settings and return to the Scanner Configuration window.
Configuring MSI Bar Codes
1. To configure MSI settings, select MSI from the Scanner
Configuration window.
MSI
Allows the scanner to scan MSI bar codes.
Transmit CD
Tells the scanner to return the check digit with the data
when an MSI bar code is scanned.
Mod 10/11
CD Scheme
Tells which algorithm to use to ensure the integrity of a
two-check digit MSI bar code.
Use 2 CDs
Tells the number of check digits that MSI bar codes
should have.
Note: Check digits are not always returned with the
data. If you choose two check digits, you must
choose a check digit algorithm.
Lengths
Sets the
length(s) for
MSI bar
codes.
Variable, specifies that MSI bar codes can be any
length.
Note: Specifying a range of lengths increases the
likelihood of unsuccessful scans.
1 Fixed, specifies a single length for valid MSI bar codes. The range for Length 1 is
1 – 99. The default is 6.
2 Fixed, specifies two lengths for valid MSI bar codes. The range for Length 2 is
1 – 99. The default is 55.
2. Enable each bar code you need to scan.
3. Touch OK to save all the settings and return to the Scanner Configuration window.
Configuring the Scanner 7-7