Avocent 590-836-501D Computer Accessories User Manual


 
Chapter 3: Operations 25
To change the OSD Timeout:
1. Press Print Screen and select the CFG tab.
Figure 3.3: Configuration Menu (OSD Timeout)
2. Enter the desired amount of time for the OSD to be displayed.
3. Click Apply to save the changes.
The Serial Menu
The user station incorporates a serial menu that allows you to:
Configure network settings for the user station
Configure network settings for the transmitter
Set or change passwords
Upgrade firmware for the user station and transmitter
Reset to factory defaults
Set a session time-out value
Change the audio performance settings
Configure the transmitter for normal aspect or wide screen resolutions
Accessing the serial menu
You can access the serial menu via the serial port on the back of the user station. All terminal
commands are executed through a terminal or computer running HyperTerminal
®
emulation software
or equivalent. By default, two passwords are required to access the LongView IP KVM user station