Filter
Top Products
Chapter 3: Operations 39
5. During reset, the LongView IP KVM user station will drop the connection to the transmitter.
When reset is complete, the LongView IP KVM user station will restore the connection to the
transmitter using the new settings.
Resetting the LongView IP KVM Extender System
To reset the LongView IP KVM user station or transmitter:
1. From the serial menu, press 1 to access the Receiver Main Menu and press Enter. If the
password option is enabled, you will be prompted for a password.
-or-
Press 2 to access the Transmitter Main Menu and press Enter. If the password option is
enabled, you will be prompted for a password.
2. From the Receiver or Transmitter Main Menu, press 5 to access the Reset Appliance Menu and
press
Enter.
Figure 3.17: Receiver Reset Appliance Menu
3. Press 1 and Enter to access the Receiver or Transmitter Reset menu to initiate the reset. A
message will be displayed on the serial menu that states Resetting appliance. During reset, the
connection to the transmitter or user station is dropped. When the reset is complete, you will be
automatically returned to the Main Menu. The connection to the will be automatically restored.
Viewing System Information
The serial menu enables you to display the firmware release and details of the LongView IP KVM
user station and of the transmitter.
To view LongView IP KVM user station system information:
1. From the serial menu, press 1 to access the Receiver Main Menu and press Enter. If the
password option is enabled, you will be prompted for a password.