Filter
Top Products
30 LongView® IP KVM Extenders Installer/User Guide
2. Press 2 to select the Transmitter IP Config option and press Enter. The old Transmitter IP
Address is displayed beside menu option 1.
Figure 3.9: Transmitter IP Configuration Menu on the LongView IP KVM User Station
3. Press 1 to select the Transmitter IP Address option and press Enter. Type the new IP address
for the transmitter and then press
Enter.
4. Type 0 (zero) and press Enter to return to the Network Configuration Menu. If you made a
mistake and do not wish to save the changes you made to the network settings, type
C and
press
Enter. The LongView IP KVM user station will now automatically reset to apply the new
network configuration. You will be automatically returned to the Receiver Main Menu.
5. Press 1 to select the Network Configuration option and press Enter.
Figure 3.10: Network Configuration Menu