Filter
Top Products
48 LongView® IP KVM Extenders Installer/User Guide
3. Press 4 to access the Audio Performance Menu and press Enter. This menu shows you the
audio settings that you can choose from. The current setting is indicated by an asterisk.
Figure 3.29: Receiver Audio Performance Menu
4. Type the number that corresponds to the audio setting you wish to apply and press Enter.
NOTE: If you press 3 to select Off, audio support will be disabled.
5. To confirm your selection and exit the screen, type 0 (zero) and press Enter. The unit resets
after you press
Enter.
Display power saving mode
You can set and display the power saving mode feature.
To set up the display power saving mode feature:
1. From the serial menu, press 1 to access the Receiver Main Menu and press Enter. If the
password option is enabled, you will be prompted for a password.
2. Press 8 to access the Console Settings Menu and press Enter.
3. Press 8 to display the Power Saving configuration.