Filter
Top Products
Chapter 3: Operations 33
3. Press 1 to select Network Configuration and press Enter. The Network Configuration Menu
will appear.
4. Press 2 to select Transmitter IP Config and press Enter. The Transmitter IP Config menu will
appear. The old Transmitter IP Address is displayed beside menu option 1.
5. Press 3 to select Detect Transmitter Address and press Enter.
6. Turn on the transmitter.
7. The LongView IP KVM user station will detect and save the IP address of the connected
transmitter. The Transmitter IP Configuration Menu will refresh, and the current IP address of
the connected Transmitter will be displayed beside menu option 1.
8. To save your changes and exit the menu, type 0 (zero) and press Enter.
Authentication
Authentication for the LongView IP KVM user station
You can change the password settings for the LongView IP KVM user station through the serial
menu via the Receiver Security Configuration Menu.
To access the Receiver Security Configuration Menu:
1. Press Enter to display the serial menu. The Appliance Selection Menu will be displayed.
2. Press 1 to access the Receiver Main Menu and press Enter. If the password option is enabled,
you will be prompted for a password.
3. Press 2 to select the Security Configuration option and press Enter.
Figure 3.13: The Receiver Security Configuration Menu
NOTE: Press 1 to select Console password and press Enter to enable or disable a console password.