Filter
Top Products
Chapter 3: Operations 41
Configuring Video Input Settings
The LVIP-R and LVIPHR-R user stations are capable of transmitting either digital (DVI) or analog
video (VGA) from the target computer to your monitor. The LVIPDH-R user station is capable of
transmitting DVI only from the target computer to your analog or digital monitor. The LongView
IP KVM extender system will normally operate well when set on its default settings. The LVIP-R
user station needs the transmitter to be set for the dedicated video type to operate correctly.
NOTE: Video-display problems may occur if video input settings are not configured correctly,
To configure video input settings:
1. From the serial menu, press 2 to access the Transmitter Main Menu and press Enter. If the
password option is enabled, you will be prompted for a password.
2. Press 7 to access the Console Settings Menu and press Enter. The Console Settings Menu will
display.
Figure 3.20: Transmitter Console Settings Menu
NOTE: Under Video Performance, the number 1 signifies lowest quality while 5 signifies highest quality.