Filter
Top Products
Chapter 5: Local Port Operation 49
If your console is password protected, see previous procedure then go to
step 2 below.
2. Select Enable Screen Saver.
3. Type the number of minutes for Time Delay (from 1–99) that you want to
delay activation of the screen saver.
4. Choose Energy if your monitor is EnergyStar compliant; otherwise
select Screen.
CAUTION:
Monitor damage can result from the use of Energy Mode with monitors not
compliant with EnergyStar.
5. (Optional) Click Test to activate the screen saver test, which lasts 10
seconds, then returns you to the Security dialog box.
6. Click OK.
NOTE: Activation of the screen saver mode disconnects the user from a server—no server is
selected. The status fl ag displays Free.
To exit the screen saver mode
Press any key or move your mouse. The Main dialog box appears.
To turn off the screen saver
1. In the Security dialog box, clear Enable Screen Saver.
2. Click OK.
To immediately turn on the screen saver
1. Press Print Screen, then press Pause.
2. This command only works when the user is connected to a server.
Assigning Server Names
Use the Names dialog box to identify servers by name rather than by port number.