Filter
Top Products
34 DSView Installer/User Guide
3. Do one of the following:
• Click On to turn the SPC on.
• Click Off to turn the SPC off.
• Click Reboot to reboot the SPC and any attached servers. The SPC
device’s On or Off state will remain the same as the last time the
Power State dialog box was accessed.
4. Click OK to perform the selected action and close the Power State
dialog box.
NOTE: One DS port may have multiple SPC ports associated with it. Any on, off or reboot operation
you choose to perform to one SPC port associated to a specifi c DS port and target server occurs
to every SPC port associated to the DS port and target server.