Axis Communications Axis NPS 550 Printer User Manual


 
Section 2: Getting started
Axis NPS 550 User’s Manual 13
Network Installation
1. Record the serial number of your NPS 550. You will need this
number for the setup.
2. Connect your NPS 550 to the network using a twisted-pair
(10baseT) or a thin-wire (10base2) Ethernet cable.
Note: Each NPS print server is preconfigured with a unique Node Address
(identical to the serial number). You can change this to a Locally
Administrated Address, see page 68.
The installation is now completed. Proceed with the setup sections for
NetWare, Windows, OS/2, Unix and/or Macintosh.
Before you begin:
Make sure that your network is ready to accept a new node.
Any network configuration should always involve the network
manager.