Filter
Top Products
Appendix A: The parameter list
Axis NPS 550 User’s Manual 71
Unix (TCP/IP)
Use FTP to change the config file:
1. Log in to the NPS 550.
Command: ftp <host name>
Enter root as user id and pass as password.
2. Up-load the config file. Command: get config
3. Edit the file using your favorite text editor.
4. Down-load the config file. Command: put config CONFIG
The NPS 550 will automatically activate the new settings.
Apple EtherTalk
You will need FTP support (such as the MacTCP utility) to get access to
the config file from your Macintosh. Proceed as described for TCP/IP
above. You can also configure your NPS 550 from a NetWare server,
LAN Server/LAN Manager server, or a UNIX host if you have one of
those in your network.