Axis Communications Axis NPS 550 Printer User Manual


 
Section 3: Setup for NetWare
Axis NPS 550 User’s Manual 17
Print Server Mode (Automatic)
The setup procedure involves adding a print server and linking it to one
or more print queues. Both steps are carried out in PCONSOLE.
Add a Print Server Follow these steps to add a print server to your NetWare environment:
1. Log in to a file server from a client workstation.
2. Start PCONSOLE.
3. NetWare 4.xx only: Press <F4> to switch to Bindery Mode.
4. Select Print Server Information (3.xx) or Print Servers (4.xx).
5. Press <Insert> to add a new Print Server.
6. Enter the Print Server Name: AXIS<nnnnnn>
(see notes below)
<
nnnnnn> are the last six digits of the NPS 550 serial number.
7. Press Escape to return to the Main Menu.
Repeat this procedure for each file server using the NPS 550.
Notes: 1. If the serial number of your NPS 550 is 00408C100086
, then the
default name is AXIS100086
. The serial number is found on the label
at the back of the NPS 550.
2. You may change the default name using AXCFG, the Axis Configura-
tion Software. This must be done before running PCONSOLE.
3. The print server name is case insensitive in print server mode. Both
AXIS100086 and Axis100086 are valid default print server names.