Filter
Top Products
Section 3: Setup for NetWare
Axis NPS 550 User’s Manual 23
NPS 550
Configuration
The configuration involves specifying the configuration file server. This is
done using AXCFG, the Axis NPS installation software on the disk
supplied with the NPS 550. Follow the instructions in the read.me file on
the disk to install the software, then proceed as follows:
1. Start AXCFG, and select NetWare.
2. Select No at the ‘Look for old print servers’ prompt unless you are
configuring an NPS 550 with software revision prior to 4.20.
3. Choose Select All Networks, then select your NPS 550.
4. Type root and pass at the login prompt.
5. Select NETWARE MENU.
6. Select CONFSERV.
7. Type the name of the NetWare file server dedicated as the configura-
tion file server, then select OK.
Example: Use KILROY as configuration file server
8. Select Save, then select Cancel until AXCFG closes down.