Axis Communications Axis NPS 550 Printer User Manual


 
Section 8: Advanced Options
58 Axis NPS 550 User’s Manual
The following properties can be configured individually for each logical
printer:
Physical Printer Port (see table below)
Character Set Conversion (page 59)
Strings Before and After Print Jobs (page 60)
String Substitutions (page 61)
PostScript Functions (page 62)
Action at Printer Busy (page 64)
Hex Dump Mode (page 64)
The table below shows the default logical printer configuration:
Note: LF to CR+LF means that UNIX New Line commands are converted to
Carriage Return + Line Feed.
Logical printers are configured by editing a number of parameters in the
config file. There is a menu for each logical printer (PRINTER1 -
PRINTER8), see Appendix A.
Logical Printer Printer port Properties
PR1 LPT1 pass-through
PR2 LPT2 pass-through
PR3 COM1 pass-through
PR4 LPT1 pass-through
PR5 LPT2 LF to CR+LF
PR6 COM1 LF to CR+LF
PR7 LPT1 LF to CR+LF
PR8 LPT1 LF to CR+LF