Filter
Top Products
8-4
Random Access Adjustment Mode
5976052 BARCOREALITY 9300 070999
Select with or
then <ENTER>
<EXIT> to return.
Clamp Width : The width of the clamp pulse
Can be any value between 0 and 255. Change the value by pushing the cursor key è or ç.
Field Polarity :
The field polarity function is used for interlaced images. Both rasters of the image could be shifted
in a wrong way (double lines are visilble in the image). This can be corrected by forcing the field
polarity to [neg] or [pos].
Use the ENTER key to toggle between [pos] and [neg].
Field Select : Default [both]
The field select is only used for interlaced images. One frame of an interlaced image contains two
fields, an even and an odd field. The choice exists to project [both] fields on the screen or only
the [even] or [odd] field. This can be useful for 3D projection.
Use the ENTER key to toggle between [both], [even] and [odd].
Vertical Refresh [sync/async] : The way of updating the image information on the LCD panels.
Not available for PAL-SECAM-NTSC sources. This option will b displayed in gray.
* For sources with a vertical frequency up to 60 Hz : the vertical refresh rate is the same
as the vertical frequency of the incoming source. This is a necessity to project moving
images without 'motion artifacts'. For stationary images with a vertical frequency up to 60
Hz it is still possible to use asynchronous refresh. When loading Pal, Secam, NTSC-files
the synchronous mode is default, for all other sources below 60 Hz asynchronous mode
is default.
* For sources with a vertical frequency higher that 60 Hz : the vertical refresh is different
than the vertical frequency of the incoming source. Synchronous refresh cannot be used.
Vertical Sync Polarity : [leading] or [trailing]
The vertical refresh can be synchronised with the leading sync edge or trailing sync edge. Default
on [leading].
Toggling to [trailing] is only necessary for special applications where the trailing edge of the sync
signal has to be taken as a reference.
Use the ENTER key to toggle between [leading] or [trailing]
Press EXIT to leave the Edit File Option menu.
A 'Confirm Edit File' menu will be displayed.
Press ENTER to confirm and to save the new settings or EXIT to return without saving the new
entered settings.
CONFIRM
EDIT FILE
Save changes to file
xga.c30?
<ENTER> to confirm
<EXIT> to return
Rename
To change the name of a selected file:
1 Push the cursor key é or ê to highlight 'Rename'.
2 Press ENTER.
The Rename selection menu will be displayed.
3 Push the cursor key é or ê to select a file name.
4 Press ENTER to select.
The Rename menu will be displayed with the selected file name
already filled in, leave in the 'From file name :' area and in the 'To file
name :' area.
The first character is highlighted.
1 Push the cursor key ç or è to select the desired character.
2 Change that character by pushing the cursor key é or ê.
Numeric characters can be entered directly with numeric
keys on the RCU.
3 Press ENTER to confirm. The renamed file is entered in the
list of files.
4 Press EXIT to return to the Rename menu selection. No
changes are made.
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
RENAME FILE
Frome file name :
Video525.s01
To file name :
demo.c10
Select with or
Reprogram with or
or numeric keys
<ENTER> to confirm
<EXIT> to return
RENAME FILE
Filename Src Resolution
-----------------------------------------------------
Video525.s01 1 675x240i
Video525.c01 1 675x240i
Video525.c02 1 675x240i
-----------------------------------------------------
Active file : Video525.c50
Select with or
<ENTER> to accept
<EXIT> to return.