Filter
Top Products
3-1
Location and Functions of Control
5976052 BARCOREALITY 9300 070999
3
RS 232 IN
REMOTE
PROJ ECTOR MODE :
GREEN - OPERATION
RED - STANDBY
COMM UNIC ATI ON P ORT
(800-PERIPHERALS)
RS232 OUT
IR-ACKNOWLEDGED
IR-REC EIVED
DIA GNOSTICS
CODE
IR -RECEIVER
0
I
This device complies w ith Part 15 of the FCC rules. Operation
is subject to following two conditions :
(1) This device may not cause h armful interference
(2) This device must accept any interference received
including interference that may cause undesired operation
SD I IN S DI OU T
LOCATION AND FUNCTIONS OF CONTROL
Front Panel Terminology
Diagnostics code : a) source number
b) error code : a two digit error code is displayed when
something goes wrong inside the projector.
IR receiver : receiver for control signals transmitted from
the RCU.
Power switch : '1' = on, '0' = off
Power input : autoranging from 200 to 240 Vac.
Identification plate : name, serial number, art. number.
Voltage identification plate : name, art. number.
SDI IN - SDI OUT (option): Serial digital input and loop trough
output.
2 x BNC terminals.
Hardwired remote CTRL2 : remote input via XLR plug.
1
2
3
RS232 IN : to allow communication with external compu-
ter, e.g. IBM PC or compatible, Macintosh ...
RS232 OUT : used to connect to next projector, RS232IN
plug (communication link for PC or MAC to the next
projector).
Communication port : allows communication with the
800 peripherals.
Remote : remote input for wired remote control.
Projector mode indication : indicates the status of the
projector.
Light off : power switch is not pressed.
Red light : power switch is pressed, projector in
stand by mode.
Green light : projector in operational mode.
IR-Acknowledged : IR signals are recognized.
IR-Received : IR signals are received but not recognized
by the projector.
4
5
Control Panel Terminology
a. Local keypad
Gaining access
6
7
8
9
10
11
12
The keypad is located behind a door, screened with the name
of the projector.
To open the door, push once on the indicated side of the door
and turn it to the front side of the projector.
13
14