Filter
Top Products
9-4
Installation Mode
5976052 BARCOREALITY 9300 070999
Red on Green convergence
1 Highlight 'Red on Green' by pushing the cursor key é or ê
and press ENTER to display the Red on green
test pattern.
The drawings and digit will be displayed in red.
2 Adjust position 1, 2 and 3 to obtain an optimal focus for these
lines.
3 Due to interaction, it will be necessary to repeat step 2.
4 Adjust position 4 and 5 for optimal convergence of the lines
in 4 and 5.
5 Adjust position 6 for optimal convergence of the vertical lines
in 6.
6 Check if all lines are correctly converged.
Select with or
then <ENTER>
<EXIT> to return.
CONVERGENCE
GREEN TO MIDPOSITION
GREEN
BLUE ON GREEN
RED ON GREEN
HATCH
ABOUT MOCA
Hatch
To check the result of the convergence adjustment :
1 Push the cursor key é or ê to highlight 'Hatch'.
2 Press ENTER to select.
A hatch pattern will be displayed on the screen.
All lines must be displayed in white, if not so repeat the convergence
adjustment procedure.
CONVERGENCE
GREEN TO MIDPOSITION
GREEN
BLUE ON GREEN
RED ON GREEN
HATCH
ABOUT MOCA
About MOCA
This item gives information about the software version of the MOCA
unit.
1 Push the cursor key é or ê to highlight 'About MOCA'.
2 Press ENTER to select.
Software version of the MOCA unit is indicated on the menu.
CONVERGENCE
GREEN TO MIDPOSITION
GREEN
BLUE ON GREEN
RED ON GREEN
HATCH
ABOUT MOCA
About MOCA
MOtorized
Convergence
Adjustment
Soft version : 1.00