Filter
Top Products
8-10
Random Access Adjustment Mode
5976052 BARCOREALITY 9300 070999
Select with or
then <ENTER>
<EXIT> to return.
Bottom blanking
Top blanking
Right blanking
Left blanking
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
BLANKING
TOP
BOTTOM
LEFT
RIGHT
Select with or
then <ENTER>
<EXIT> to return.
Side Keystone
The side keystone adjustment is used to align the image if the projector
is mounted at a nonstandard projection angle.
To align the keystone :
1 Push the cursor key é or ê to highlight 'Side Keystone'.
2 Press ENTER to select.
3 Push the cursor key ç or è to adjust the keystone of the
image.
When the upper part of the image is wider than the lower part
of the image, push the cursor key ç. The number indication
below the bar scale will be negative.
When the upper part of the image is smaller than the lower
part of the image, push the cursor key è. The number
indication below the bar scale will be positive.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
Select with or
then <ENTER>
<EXIT> to return.
Blanking
Blanking adjustments affect only the edges of the projected image
and are used to frame the projected image on to the screen and to
hide or black out unwanted information (or noise). A '0' on the bar
scale indicates no blanking.
To adjust the blanking :
1 Push the cursor key é or ê to highlight 'Blanking'.
2 Press ENTER to display the blanking menu.
The following blanking corrections are possible :
- top blanking
- bottom blanking
- left blanking
- right blanking