Filter
Top Products
Installation
40 ETEP Installation Guide
Figure 27 Improperly seated ET0100A power cable
When the appliance powers up, all LEDs illuminate (see Figure 28). The Alarm LED illuminates briefly
and the diagnostic code LED displays 88 to verify that the diagnostic display segments are functioning.
The power LED remains lit until the unit is powered off.
During the boot process the ET0100A cycles through its startup tests, and the corresponding diagnostic
codes are displayed. After the tests execute successfully, the diagnostic code display is solidly illuminated
with code 00.
NOTE
During the boot process the ET0100A discards all traffic on its data ports. Once the appliance is
operational, the default mode of operation passes all packets in the clear until you deploy security policies.
Figure 28 ET0100A Front Panel Status Indicators
Installing the ET1000A
To prepare the ET1000A for installation, review the installation steps in Table 16, unpack the shipping
carton, and prepare a space for the installation of the appliance.
Elements of Figure 28:
1) Diagnostic display
2) Alarm LED
3) Power indicator