Filter
Top Products
General Setup
5
1
LCD screen 1
Setting the backlight
brightness 1
You can adjust the brightness of the LCD
backlight. If you are having difficulty reading
the LCD, try changing the brightness setting.
a Press MENU.
b Press a or b to display
General Setup.
Press General Setup.
c Press a or b to display LCD Settings.
Press LCD Settings.
d Press Backlight.
e Press Light, Med or Dark.
f Press Stop/Exit.
Setting the Dim Timer for the
backlight 1
You can set how long the LCD backlight stays
on after you go back to the Ready screen.
a Press MENU.
b Press a or b to display
General Setup.
Press General Setup.
c Press a or b to display LCD Settings.
Press LCD Settings.
d Press Dim Timer.
e Press Off, 10 Secs, 20 Secs or
30 Secs.
f Press Stop/Exit.
Dial Prefix 1
The Dial Prefix setting will automatically dial a
predefined number before every fax number
you dial. For example: If your telephone
system requires a 9 to dial an outside number
use this setting to automatically dial 9 for
every fax you send.
Setting up the prefix number 1
a Press MENU.
b Press a or b to display
Initial Setup.
Press Initial Setup.
c Press a or b to display Dial Prefix.
Press Dial Prefix.
d Do one of the following:
If you want to set the dial prefix
feature to on, press On. Go to
step e.
If you want to set the dial prefix
feature to off, press Off. Go to
step g.
e Press Dial Prefix.
f Enter the prefix number (up to 5 digits)
by pressing the buttons on the
Touchscreen.
Press OK.
Note
• You can use the numbers and symbols 0
to 9, #, and l. (You cannot use ! with any
other numbers or symbols.)
• If your telephone system requires a time
break recall (hookflash), press ! to enter
the break.
• (Canada only) If pulse dialing mode is on,
# and l are not available to use.
g Press Stop/Exit.