Filter
Top Products
Chapter 1
6
Changing the prefix number 1
a Press MENU.
b Press a or b to display
Initial Setup.
Press Initial Setup.
c Press a or b to display Dial Prefix.
Press Dial Prefix.
d Press On (or Off).
You can turn off the prefix number by
pressing Off. The prefix number will
remain off until you press On.
e Press Dial Prefix.
f Do one of the following using the buttons
on the Touchscreen.
To change the prefix number, press
d or c to position the cursor under the
digit to be deleted and press the
Back Space button . Then press
the correct digit.
Repeat until the prefix number is
correct, and then press OK.
To exit without making a change,
press OK.
Note
• You can use the numbers and symbols 0
to 9, #, and l. (You cannot use ! with any
other numbers or symbols.)
• If your telephone system requires a time
break recall (hookflash), press ! to enter
the break.
• (Canada only) If pulse dialing mode is on,
# and l are not available to use.
g Press Stop/Exit.
Mode Timer 1
The machine has three mode keys on the
control panel: FAX, SCAN, and COPY.
You can set how much time the machine
takes after the last Copy or Scan operation to
return to Fax mode. If you choose Off, the
machine will stay in the mode you used last.
This setting also sets the time the machine
will change from a restricted user to the
Public mode when using Secure Function
Lock. (See Switching Users on page 12.)
a Press MENU.
b Press a or b to display
General Setup.
Press General Setup.
c Press a or b to display Mode Timer.
Press Mode Timer.
d Press 0Sec, 30 Secs, 1 Min,
2 Mins, 5 Mins or Off.
e Press Stop/Exit.