Filter
Top Products
Chapter 3
22
Real Time Transmission 3
When you are sending a fax, the machine will
scan the documents into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialing and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can
turn on Real Time TX.
Note
• If the memory is full and you are sending a
black and white fax from the ADF, the
machine will send the document in real
time (even if Real Time TX is set to Off). If
the memory is full, faxes from the scanner
glass cannot be sent until you clear some
of the memory.
• In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
a Press (FAX).
b Load your document.
c Press d or c to display Real Time TX.
Press Real Time TX.
d Press On.
Overseas Mode 3
If you are having difficulty sending a fax
overseas due to a bad connection, then
turning on Overseas Mode may help.
This is a temporary setting, and will only be
active for your next fax.
a Press (FAX).
b Load your document.
c Press d or c to display
Overseas Mode.
Press Overseas Mode.
d Press On.
Delayed Fax
(black & white only) 3
You can store up to 50 faxes in the memory
to be sent within a twenty-four hour period.
a Press (FAX).
b Load your document.
c Press d or c to display Delayed Fax.
Press Delayed Fax.
d Press On.
e Enter the time you want the fax to be
sent (in 24-hour format) by pressing the
buttons on the Touchscreen. (For
example, enter 19:45 for 7:45 PM.)
Press OK.
Note
The number of pages you can scan into
the memory depends on the amount of
data printed on each page.