Brother 9970CDW All in One Printer User Manual


 
Routine maintenance
75
A
n Turn the drum unit gear toward you by
hand while looking at the surface of the
suspected area.
o When you have found the mark on the
drum that matches the drum dot check
sheet, wipe the surface of the drum
gently with a cotton swab until the mark
on the surface comes off.
IMPORTANT
The drum is photosensitive so DO NOT
touch it with your fingers.
DO NOT clean the surface of the
photosensitive drum with a sharp object.
DO NOT use a scrubbing or wiping motion
because this might damage the drum.
p Turn the drum unit over by holding the
green handles.