Filter
Top Products
124
CHAPTER THIRTEEN
4
At the DOS prompt (C:\>) type x: (Substitute the drive letter of your
CD-ROM drive for “x”) and press Enter.
C:\>x:
5
Type CD:\YL-II\WIN3X\MFLPRO\DRIVERS\DISK3 and press Enter.
(“3X” is Windows
®
3.1 or 3.11)
x:\>CD:\YL-II\WIN3X\MFLPRO\DRIVERS\DISK3
6
Type RPCSETUP and press Enter.
x:\YL-II\WIN3X\MFLPRO\DRIVERS\DISK3>RPCSETUP
7
Follow the instructions from the installer.
Using the Remote Printer Console Main Program
Type C:\RPCX>RPCX and press the Enter key to start the Remote Printer
Console main program.
The Main Screen will appear on your computer screen as shown below.
Direct_Access Printer_Setup Console_Config Guide
Remote Printer Console
Current Status
Status
Paper feed
Emulation
Paper Size
Orientation
Quality
Copies
Memory size
Ready
Sheet Feeder
PCL
Letter
Portrait
Normal
1
524288 Byte
[Enter] Setting[↑/¬] Select
[ESC] Exit[F1] Help[Alt+Character] Menu
If bi-directional communication is enabled between your computer and
MFC when it starts, the RPC gets the current settings information from
your MFC. Otherwise, RPC shows its default settings. If you want to change
settings, move the cursor to the item you want and select it using the Enter
and Cursor keys. Then, press the Enter key to make the selected setting
valid.