Filter
Top Products
82
CHAPTER NINE
Remote Retrieval
You can call your MFC from any fax machine using touch tone and use a
Remote Access Code and other button presses to retrieve fax messages.
Keep the included Remote Control Access Card in your wallet as an aid.
Using Remote Access Code
1
Dial your fax number from a fax machine using touch tone.
2
When your MFC answers and beeps, immediately enter your Remote
Access Code (1 5 9 ).
3
The MFC signals the kinds of messages received:
1 long beep — Fax message(s)
No long beeps — No messages
4
The MFC then prompts you with two short beeps to enter a command.
If you wait longer than 30 seconds to enter a command, the MFC hangs
up. If you enter an invalid command, the MFC beeps three times.
5
Press
9
0
to reset the MFC when you finish.
6
Hang up.
If your MFC is set to Manual mode, you can access your machine by
waiting about 2 minutes, then entering the Remote Access Code within 30
seconds.
See
Changing
Remote Access
Code
p. 81