Filter
Top Products
70
CHAPTER SIX
5
Press
1
to select DOC if you want your MFC to scan the printed
document at the time it is polled—OR—Press
2
to select MEMORY.
ACCEPTED
1.YES 2.NO
OTHER SETTINGS?
6
Press
1
if you want to select additional settings. The display returns to
the SETUP SEND menu—OR—Press
2
if you are finished choosing
settings and go to step 7.
7
Press
Start
.
If you pressed
1
in Step 5, the printed document remains in the document
feeder until your MFC is polled. However, you can "interrupt" it to send
another fax.
Canceling a Job While Scanning the Document
You can cancel a job while you are scanning it into memory by pressing
Stop
. Eject the document by pressing
Stop
again.
Interrupting Delayed Fax and Polling Transmit Jobs
You can send a fax or make a copy now, even if you have the MFC set to
send a fax later or to be polled. However, you cannot use automatic redial or
the Function mode.
1
Press
Function
,
1
,
5
.
2
Wait 2 seconds, then remove the documents that are waiting in the
feeder.
INSERT DOCUMENT
3
Place the “new” document you want to send now in the feeder.
4
Enter the new fax number for the documents you want to send now.
5
Press
Start
.
6
After the transmission is finished, place the “old” documents back into
the feeder.
7
To restore the Delayed Fax and/or Polling.
Press
Function
,
1
,
5
.
See
Delayed Fax
p.66
and
Setting Up
Polling
Transmit
p.69