Filter
Top Products
27
ON-SCREEN PROGRAMMING
2. SETUP RECEIVE
Function Description Factory Set More Info
1. RING DELAY Number of rings before MFC RING DELAY: 04 p. 40
answers in FAX, FAX/TEL, or
MC mode.
TOLL SAVER:OFF p. 101
(MFC 6650MC Only)
2. F/T RING TIME Sets the time for “double ring” in 20 p. 41
FAX/TEL mode.
3. EASY RECEIVE Receive fax messages without ON p. 42
pressing the Start key.
4.REMOTE CODE Enter code to activate or deactivate ON ( 51, #51) p. 45
machine from a remote location.
5.REDUCTION Reduces size of image. AUTO p. 43
6.PAPER Selects size of paper for fax receiving. LETTER p. 43
7.PRINT DENSITY Make prints darker or lighter. — p. 44
8.POLLING RX Turns Polling Receive ON or OFF. OFF p. 46
9.TONER SAVE Increses life of toner cartridge. OFF p. 44
0.MF LINK
(For MFC 4650,
Turn ON if PC is connected to MFC, ON p. 49
MFC 6650MC
and
for PC receiving of voice and fax
MFC 7750 Only)
messages.
1. INITIAL SETUP
Function Description Factory Set More Info
1. TONE/PULSE Selects dialing mode. TONE p. 31
2. DATE/TIME Enter date and time for LCD
01/01 1999 00:00
p. 32
display and heading on
transmissions.
3. STATION ID Program name, fax number and — p. 33
telephone number to appear on
each transmitted page.
4. BEEPER Adjust volume level of beeper. LOW p. 36
5. SLEEP MODE Conserve power 00 Min. p. 37
6. DELAYED TIMER Sets the time of day that delayed — p. 38
faxes will be sent.
Function Selection Table
If you have a basic understanding of how to program your MFC, you can
perform most of the programming settings without the Owner’s Manual. To
help you understand the function selections, options, and settings that are
found in your fax programs, use the Function Selection Table below.
1. Fax Functions