Brother MFC-6650MC Printer User Manual


 
221
TROUBLESHOOTING AND MAINTENANCE
Replacing the Drum Unit
The MFC uses a drum unit to create the print images on paper. If the screen
displays CHANGE DRUM SOON, the drum unit is near the end of its life.
Purchase a new drum unit to replace the current one.
Even if the display shows CHANGE DRUM SOON, you may be able to
continue to print without replacing the drum unit for a while. However, if
there is a noticeable deterioration in the output print quality even before
CHANGE DRUM SOON is shown, then the drum unit should be replaced.
You should clean the MFC when you replace the drum unit.
WARNING
When removing the drum unit, handle carefully because it contains toner.
When you replace the drum unit, you should clean the MFC.
(See page 217)
The drum unit is a consumable, and it is necessary to replace it periodically.
There are many factors that determine the actual drum life, such as temperature,
humidity, type of paper and toner that you use and the number of pages per print
job, etc. The drum life is estimated at approximately 20,000 pages at 20 pages
per job and 8,000 pages at 1 page per job. The actual number of pages your drum
will print may be significantly less than these estimates. Because we have no
control over the many factors that determine the actual drum life, we cannot
guarantee a minimum number of pages that will be printed by your drum.
For best performance, use only genuine Brother toner, and the product should be
used only in a clean, dust-free environment with adequate ventilation.