Brother MFC-6650MC Printer User Manual


 
5
INTRODUCTION
MFC 4350, MFC 4650 and MFC 7750
Control Panel Keys
1
Hook
Lets you dial telephone and
fax numbers without lifting
the handset.
2
Hold
Lets you put calls on hold.
3
Redial/Pause
Re-dials the last number
called. Also inserts a pause
in autodial numbers.
4
Speed Dial
Lets you dial stored phone
numbers by pressing a
two-digit number.
5
Dial Pad
Dials phone and fax
numbers and can be used as
a keyboard for entering
information into the MFC.
6
Shift
This key is used to access
the "13" through "24" One
Touch numbers. In the
printer mode when shift is
pressed together with Test/
Reset, it resets and restores
the MFC to the factory
default settings.
7
One Touch Dial Keys
These 12 keys give you
instant access to previously
stored phone numbers.
8
Enlarge
Enlarges copies depending
on the ratio you select:
200%, 150%, 125%, 120%,
and 100%.
9
Sort
Use this key when you
want multiple copies of a
multiple page original,
copied in order.
10
Stop
Stops a fax, cancels an
operation or exits from
function mode.
11
Photo
This key is used to copy
photographs.
12
Reduce
Reduces copies depending
upon the ratio you select:
100%, 93%, 87%, 75%, and
50%. You can also use the
Auto Reduction function
to have the MFC
automatically calculate the
reduction ratio that fits the
size of your paper.
13
Start
Starts sending a fax.
14
Copy
Makes a copy.
15
FF/Cont
When the LCD shows
REMAINED DATA, you
can turn the MFC
OFFLINE and then press
this key to print the data
that is in the memory.
Also, it clears operation
and machine errors.
16
Print Priority
When this key is pressed,
all faxes will be received
into memory without first
printing and can be printed
later. This key also
increases the memory
available for printing,
without decreasing memory
available for memory
transmissions and incoming
messages.
17
Test/Reset
This key is used to print a
test page. When it is
pressed together with Shift,
it clears the data from the
printer memory, cancels an
error status, and then resets
and restores the MFC to the
factory default settings.
18
On/Off Line
This key is used to turn the
printer online (ready to
receive PC data) and offline
(not ready to receive PC
data) alternately. When the
printer is online, the LCD
displays ONLINE.
19
Help/Broadcast
Prints a quick reference
Help List. Also, you can
use this key whenever you
want to send faxes to many
different locations
(maximum of 174 locations)
at once.
20
Mode
Select how the MFC will
handle incoming calls.
21
Resolution
Sets the resolution when
you send a fax.
22
Tel-index
Lets you look up numbers
stored in the dialing
memory.
23
Volume
High/Low
Lets you adjust speaker,
ring and handset volume.
24
Clear
Deletes entered data or
backs up one step in
function procedure.
25
(Left Arrow)
(Right Arrow)
Moves the LCD cursor to
the left or right.
26
Liquid Crystal
Display (LCD)
Displays messages to help
you set up and operate your
MFC.
27
Set
Stores a function setting
into the MFC.
28
Function
Lets you access the
function and programming
mode.
29
Toner Empty LED
The Toner Indicator flashes
on and off when toner is
low, so you'll know to
order another toner
cartridge. You will be able
to print until the indicator
stays on.