Filter
Top Products
25
STEP
1
STEP
2
STEP
3
STEP
4
Before using the
printer
Introduction
For WindowsFor Macintosh
Maintenance and
Troubleshooting
Using only this printer
(No PC)
Connecting to your PC
When using the printer on Windows
®
, do not connect the printer to the PC
before installing software.
Do not connect the printer to the PC until the message that prompts the connection
when installing the printer driver.
When connecting the printer to the PC
before installing the printer driver, the dialog
box shown right is displayed. At that time,
click [Cancel] and disconnect the USB
cable. Then, install the printer driver. For
details, refer to
Î"3. Installing the software"
in page 43.
1
Insert the power cord into the power
cord slot on the rear side of the
printer.
2
Insert the power plug into the outlet.
• Before inserting the plug, check the outlet is for 120
VAC.
• Locate the printer near the outlet where the power
plug can be pulled out easily.
• When inserting or pulling out the power cord, be sure
to hold the power plug.
5 Connecting the power supply
Power cord Slot
Power cord