Filter
Top Products
51
STEP
1
STEP
2
STEP
3
For WindowsFor Macintosh
STEP
4
Before using the
printer
Using only this printer
(No PC)
Connecting to your PC
Introduction
Maintenance and
Troubleshooting
16
Select the drive where you install the
driver, and click [Install].
The screen in which the name and password of
administrator is displayed.
17
Input "Name" and "Password" of
administrator and click [OK].
The screen to check the installation is displayed.
18
When continuing the installation, click
[Continue Installation].
The installation starts.
19
When the installation is completed and
the message "The software was
successfully installed" is displayed, click
[Restart].
Macintosh
®
is rebooted.
The installation of printer driver is completed.
20
After rebooting, connect the USB
cable and power cord to the
printer.
As the caution label is put on the USB
port of the printer, remove it and then
connect the USB cable.
21
Connect the USB cable to the USB port of Macintosh
®
.
Press ON/OFF button ( ) of the printer to turn on the power.
When connecting the printer to Macintosh
®
via USB hub, it may not be
connected correctly. At that time, connect the printer directly to the USB port of
Macintosh
®
.
USB cable
Power cord
USB port
Power cord
slot