Filter
Top Products
38
CHAPTER FOUR
Using Memory Security
You must use a password to switch Memory Security ON and OFF.
Setting Up Memory Security for the First Time
1
Press Menu, 0, 2, or press Security.
The screen prompts you to enter the password, and then press Set.
NEW PASSWD:XXXX
ENTER & SET
2
Enter a 4-digit number as a password.
3
Press Set.
The screen prompts you re-enter the password.
VERIFY:XXXX
ENTER & SET
4
Re-enter the password and press Set.
5
The screen displays
SET SECURITY
SELECT { } & SET
SET PASSWORD
SELECT { } & SET
6
Press or to choose SET SECURITY.
7
Press Set. The screen prompts you to enter the password.
PASSWORD:XXXX
ENTER & SET
8
Enter a 4-digit password, followed by Set.
This is the same as the security password of your machine already
stored.
The screen displays ACCEPTED for 2 seconds, followed by SECURE
MODE - Memory Security is now switched ON.
If the password you enter at Step 8 is incorrect, the screen would display
WRONG PASSWORD. After 2 seconds the display will then return to
normal (displaying the date & time). You must then start from Step 5 to
set Memory Security.