Filter
Top Products
46
CHAPTER FIVE
Setting the Print Density
If your machine is printing too light or too dark, you can adjust the print
density level. The new setting will remain until you change it again.
1
For the FAX-8350P, Press Menu, 2, 7.
For the MFC-9650/FAX-8750P, Press Menu, 1, 2, 7.
2
Press or to select your setting. Each key press changes the
print density to the next setting.
3
When the screen shows the setting you want, press Set.
4
Press Stop to exit.
Toner Save
You can conserve toner using this feature. When you set Toner Save to
ON, print appears somewhat lighter. The default setting is OFF.
1
For the FAX-8350P, Press Menu, 2, 9.
For the MFC-9650/FAX-8750P, Press Menu, 1, 2, 9.
2
Press or to turn ON (or OFF).
3
Press Set.
4
Press Stop to exit.
Lower Tray
You can set the machine to recognize the optional lower tray. When
Lower Tray is set to ON, you can set which cassette you want to use for
printing.
1
After setting up for the optional paper tray,
For the FAX-8350P, Press Menu, 0, 4.
For the MFC-9650/FAX-8750P, Press Menu, 1, 0, 4.
2
Press or to turn ON (or OFF).
3
Press Set.
Setting Lower Tray
The default setting of AUTO allows your machine to choose the lower
tray if paper is out in the upper tray. Choose UPPER if you want to keep
special paper in the lower tray and control when it is used.
4
Press or to select AUTO, UPPER or LOWER and press Set.
5
Press Stop to exit.