Filter
Top Products
48
CHAPTER FIVE
For Fax/Tel (F/T) Mode Only
When the machine is in Fax/Tel (F/T) Mode, it will use the F/T Ring
Time (F/T pseudo-ringing) to alert you to a voice call. If you’re at the
machine, you can lift the external telephone’s handset and press Tel to
answer.
If you’re at an extension phone, you’ll need to lift the handset during the
F/T Ring Time and press # 5 1 between the F/T pseudo-rings. If no one
is on the line, or if someone wants to send you a fax, send the call back
to the machine by pressing
5 1.
Changing Remote Codes
Remote Codes might not work with some telephone systems. The preset
Activation Code is
5 1. The preset Deactivation Code is # 5 1.
If you are always disconnected when accessing your external TAD
remotely, try changing the Activation Code from
5 1 to # # # and the
Deactivation Code from # 5 1 to 1 1 1. You cannot use the same number
for the Activation Code and the Deactivation Code.
To change Remote Codes
1
For the FAX-8350P, Press Menu, 2, 4.
For the MFC-9650/FAX-8750P, Press Menu, 1, 2, 4.
2
Press or to select ON (or OFF).
REMOTE ACT.:ON
SELECT { } & SET
3
Press Set when the screen displays the setting you want.
4
If you want to, enter a new Remote Activation Code, then press Set.
ACT.CODE:*51
ENTER & SET
5
If you want to, enter a new Remote Deactivation Code, then press
Set.
DEACT.CODE:#51
ENTER & SET
6
Press Stop to exit.