Filter
Top Products
45
SETUP RECEIVE
NOTE: ■ When you use Auto Reduction to reduce incoming
documents to fit on one page of recording paper, you can do
so only as long as the original document is not longer than
35 cm. If the original is longer than 35 cm, the data will not
be reduced and will carry over to print on a second page.
■ When you use Auto Reduction and you receive an incoming
document that is smaller than your recording paper, no
reduction will take place, and you will get the same size
recorded as the original.
Reception into Memory
As soon as the paper cassette becomes empty during fax reception, the
screen will display CHECK PAPER or CHECK PAPER #1; please put
some paper in the paper cassette (see chap. 2).
If the MEMORY RECEPTION setting is ON at this time…
The current fax reception will continue, with the remaining page(s) being
stored in memory, subject to available memory. Subsequent incoming
faxes will also be stored into memory until the memory is full, following
which no further incoming fax calls will be automatically answered; all
data will be printed as soon as fresh paper is put in the paper cassette.
If the MEMORY RECEPTION setting is OFF at this time…
The current fax reception will continue, with the remaining page(s) being
stored in memory, subject to available memory. Subsequent incoming fax
calls will not be automatically answered until fresh paper is put in the
paper cassette. The last fax received will be printed as soon as fresh
paper is put in the cassette.
1
For the FAX-8350P, Press Menu, 2, 6.
For the MFC-9650/FAX-8750P, Press Menu, 1, 2, 6.
The screen displays
6.MEM.RECEIVE
2
Use or to select ON or OFF.
3
Press Set when the screen displays your selection.
4
Press Stop to exit.