Filter
Top Products
CHAPTER 4 OPTIONS
4–15
☛
☛☛
☛
6.
Press the DIMM straight into the slot (press firmly). Make sure the locks on
each side of the DIMM snap inward into place. (To remove a DIMM, the
locks must be released.)
Fig. 4-13
☛
☛☛
☛
7.
Secure the metal plate with the three screws in the order shown.
Fig. 4-14
☛
☛☛
☛
8.
Install the side cover.
☛
☛☛
☛
9.
Reconnect the interface cable from your computer.
Plug the power cord into the AC outlet, and then turn on the printer.
☛
☛☛
☛
10.
To check whether the DIMM has been installed correctly, you can print a
Test page “Print Configuration” that will print the current memory size. To
print a “Configuration page,” see Chapter 3.
①
①①
①
③
③③
③
②
②②
②