Filter
Top Products
General Information
96
3
1
### means a number within the range of 000 to 255. On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt
to set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA IP address will
be allocated, such as 169. 254. [001-254]. [000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’ you must manually enter an IP address
from the machine's control panel.
Network for HL-L8250CDN
Submenu 1 Submenu 2 Menu Selections Options Descriptions
TCP/IP Boot Method - Auto* / Static / RARP /
BOOTP / DHCP
Chooses the IP method
that best suits your needs.
IP Address - ###.###.###.###
(000.000.000.000)*
1
Enter the IP address.
Subnet Mask - ###.###.###.###
(000.000.000.000)*
1
Enter the Subnet mask.
Gateway - ###.###.###.###
(000.000.000.000)*
1
Enter the Gateway
address.
IP Boot Tries - 0 / 1 / 2 / 3* / ... / 32767 Specifies the number of
attempts the machine will
try to obtain an IP address
when the Boot Method is
set to any setting except
Static.
APIPA - On* / Off Automatically allocates
the IP address from the
link-local address range.
1
IPv6 - On / Off* Enables or disables the
IPv6 protocol.
Ethernet --Auto* / 100B-FD /
100B-HD / 10B-FD /
10B-HD
Chooses Ethernet link
mode.
Wired Status --Active 100B-FD /
Active 100B-HD /
Active 10B-FD /
Active 10B-HD /
Inactive / Wired OFF
Displays Ethernet link
status.
MAC Address - - - Displays MAC address of
the machine.
Security IPsec - On / Off*
IPsec is an optional security
feature of the IP protocol
that provides authentication
and encryption services.
We recommend contacting
your network administrator
before changing this
setting.
Network Reset Restores all network settings of the internal print server to the factory settings.
The factory settings are shown in Bold with an asterisk.